Operation - Siemens HiPath 1100 Service Manual

Operation

6 Operation
This chapter describes the procedures for powering up and initializing the systems.
Warning
!
Powering up and initializing the system is a task that must be performed only by au-
thorized technical personnel.
Step
1. Connecting the system to its power supply
(Connect the power cable -> System Startup).
2. Activating System Programming
3. Programming with a Telephone Set
4. Programming the system using a PC
5. HiPath 1100 Applications
Connecting the system to its power supply
Procedure
Step
1. Complete installation of all modules and system (Chapter 4, "Installation").
2. Power up the system.
3. Wait a few moments for the system to load the software.
Activating System Programming
The HiPath 1100 system comes with a factory default configuration, which is described in the
programming tables.
If an update or modification is required, there are two possible programming options:
Using a system telephone or a Standard MF telephone
Using a computer
6-1
Action (Instructions)
Procedure
Programming Options
6-1
6-1
6-2
6-3
6-50
Page
6-2
6-3
A31003-K1160-S100-03-7620
Service Manual