Hardware Requirements:
– 10/100 BaseT network interface card
General Information:
– TCP/IP protocol
– Default IP: 10.0.0.1;
– Default Subnet Mask: 255.255.255.0.
If you need to reset the IP address and the subnet mask, use code 013 "Restore
ADSL module default settings. When the restore process is completed the ADSL
module IP is 10.0.0.1.
When using an ADSL module, do not connect the V.24 serial interface adapter cable
to the PABX
After activating ADSL access to your provider and connecting to the HiPath 1100, you must
configure the appropriate settings for WAN and LAN connection. The HiPath 1100 ADSL
Manager software application was designed for this purpose. It provides viewing, editing and
updating capabilities for system configuration.
For more details on how to configure an ADSL module see the HiPath 1100 ADSL Manager
"Help" system.
6.4.4
E1 Trunk Manager
The E1 Trunk Manager is an administrative program for configuring a TME1 module with E1
CAS access.
Hardware Requirements:
– Serial interface communications (COM port).
General Information:
Using the E1 Trunk Manager you can:
Download software and databases
●
Remove traces
●
Select the software's type of connection to the module (local or via modem)
●
Select a COM port
●
A31003-K1160-S100-03-7620
Service Manual
Operation
HiPath 1100 Applications
6-52