Siemens HiPath 1100 Service Manual page 266

Configuring the system specifically for the client
Comments about the System's Programming Codes
Special Class of Service for Blocked Extensions (096)
This allows you to switch a blocked extension (with an electronic lock) to any class of service.
Speed Dial/Phonebook (112)
You can store up to 250 telephone numbers of up to 20 digits each in the System Speed Dial.
You can assign a name of up to 15 characters to each number. This allows you to do
alphanumeric searches in the Speed Dialing Phonebook (see Speed Dial Search in the User
Manual).
To insert an interdigit pause you must enter the "P" character using the HiPath 1100 Manager
or pressing the Redial Key using a system telephone (see "Interdigit Pause Time Setting (227)"
on page 7-47).
You can look for phone numbers in the Speed Dial Phonebook by entering their assigned
speed-dial number. This can be done from any extension. By default there are no speed-dial
numbers stored in the phonebook.
.
For the HiPath 1120, the Phonebook entry 249 is reserved for relay and sensor func-
tions.
To dial an external number enter the external line number instead of the external ac-
cess code "0."
Denied Numbers List (123)
There are 3 Denied Numbers Lists valid for all extensions in the category "Restricted Trunk
Access (with Denied List)". List 1 allows you to store 4 numbers; list 2, up to 10 numbers; and
list 3 up to 35 numbers.
To change a blocked number enter its Phonebook entry number then the new num-
ber.
Permission List (124)
There are 3 Permission Lists that are available for dialing from any extensions in the category
"Outward-Restricted Trunk Access". List 1 allows you to store 4 numbers; list 2, up to 10
numbers; and list 3 up to 25 numbers.
To change a released number enter its Phonebook entry number then the new num-
ber.
7-28
A31003-K1160-S100-03-7620
Service Manual