Connecting Extensions To The System's Internal Mdf (Main Distribution Frame) - Siemens HiPath 1100 Service Manual

Installation

Connecting Extensions to the System's Internal MDF (Main Distribution Frame)

Warning
!
Before powering up the system, ensure that the chassis is properly grounded. Turn
system power on or off by using the switch located on the system's AC input.
4.8 Connecting Extensions to the System's Internal MDF (Main
Distribution Frame)
Introduction
Attach cables to the system's Main Distribution Frame and route them through the conduits and
openings to reach the carrier's main telephone distribution cabinet.
Below are some configuration examples. For different configuration the following factors must
be taken into consideration: capacity, available modules and their features, and other
requirements mentioned in previous chapters.
The HiPath 1100 Manager is available to help you configure the systems. It provides an
overview of the PABX MDF in order to show the physical layout of the system's modules,
extensions and external line connections. You can also see the numbering for extensions and
external lines and the logical numbers for the ports assigned (see the Help file for more
information).
4-38
A31003-K1160-S100-03-7620
Service Manual