Connections
Step
1.
Attach the end of the V.24 serial interface cable with the Mini DIN connector (male)
to the MB's serial Mini DIN connector . Attach the other end to the printer or PC serial
port. When connecting to a PC, make sure that either the COM 1 or COM 2 port is
available.
2.
The following parameters can be configured when using a PC:
9600 / 14400 / 19200 (default) / 38400 / 56000 / 57600 / 115200 /128000 /
●
256000 baud
Fixed settings:
8 Bits
●
1 Stop Bit
●
No Parity
●
3.
When connecting to a printer, make sure the current time at the PABX is set
correctly.
Note
!
With an ADSL module do not use the MB's serial connector since the HiPath 1100
serial connection is assigned to the ADSL module. All functions of the serial port are
now executed over the LAN.
4.10
Installing an USB Interface
Introduction
To connect a PC to the HiPath 1100 using an USB interface you must have an USB adapter
cable (see "USB adapter cable" on page 3-67). This interface allows you to use applications
developed specifically for configuring and managing user features.
Warning
!
The drivers requires for the installation are included in the Setup CD.
A31003-K1160-S100-03-7620
Service Manual
Procedure
Installation
Installing an USB Interface
4-47