Siemens HiPath 1100 Service Manual page 271

False tone (063)
This sends an external line dial tone even when there is no external line available (valid for MF/
DP extensions only).
If LCR (configured via the
a False Tone regardless of what has been programmed.
Internal Access Code for Automatic Seizure (226)
This features specifies the code to be used for making internal calls when an extension is
configured for Automatic Seizure of an External Line.
Access codes are configured according to the country. If no access code is specified, the
feature will not work.
Country Code
Spain 99
Latvia
Lithuania
Australia
Greece
Italy 69
Portugal 6
Other None
External line present (079)
This setting allows you to determine whether a given external line exists.
In the case of an external ISDN line, if the setting is configured as Absent two inter-
faces will be disabled. For digital lines (E1 CAS) you must also program a TME1 Mo-
dule using the E1 Trunk Manager application.
Waiting time for a Second Attendant to answer a call on an external analog line (083)
This setting specifies a timeout before the call starts ringing at the extension.
Overflow to a Group of External Lines (099)
This feature makes a second group of external lines available in the event the lines in the first
group are busy. The availability of the second group of external lines depends on the
extension's class of service.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
) or Emergency Numbers
is enabled, the user will hear
7-33