Usb Interface - Siemens HiPath 1100 Service Manual

6.2.1.2

USB Interface

In this case there are two possibilities: USB Interface or USB Interface + CAPI Interface.
Figure 6-2 Possible USB Configurations
For carrying out HiPath 1100 administration using a computer and a USB interface, you must
install the proper CallBridge for Data USB drivers specific for the HiPath 1100 family. This
allows the computer to communicate with the system. This task must be complete before
installing the HiPath 1100 applications.
Install the required drivers (see Capítulo 6, "HiPath 1100 USB Drivers") and after that start
installing applicationsHiPath 1100:
Procedure:
1. Insert the HiPath 1100 CD in the CD drive;
If Auto-Run is not configured, go to the Start menu on Windows, click "Run" and then select
the "Browse" button in the dialog box. Open the file SETUP.EXE on the CD drive.
2. In the Setup window, select the language you want to use
Once the language has been selected, all corresponding country-specific settings will be
established.
3. A window will appear where you can select the software to be installed
A31003-K1160-S100-03-7620
Service Manual
HiPath 1100 Applications
Manager Software
Billing
CommServer
CallBridge
for Data
USB
HiPath
1100
Programming the system using a PC
Possible USB
Configurations
Transmission
Status Monitor
USB
Operation
6-6