Figure 6-28 Windows Xp - Driver Location - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
11. The installation of the USB drivers is now completed. CAPI applications installation will
now start automatically (see "CAPI Application Setup" on page 6-31).
Windows XP
In order to install any software you must have Administrator's access privileges.
Proceed as follows:
1. Connect the HiPath 1100 system to the computer using a USB cable
2. The Found New Hardware Wizard window appears so that new drivers can be installed.
Choose "Install from a list or specific location (Advanced)." Click "Next" to proceed.
Figure 6-28 Windows XP - Driver location
3. A second window opens. Select "Search for the best CAPI in these locations" then select
"Include this location in the search". Under Browse, select the directory where the
decompressed driver is stored. Drivers can be found on the CD, in the folder
\Software\USB Drivers. The driver is decompressed in C:\Temp (Default). If the
Administration
C:\Temp\HiPath1100_Adm_Drivers_040. If you select the Administration + CAPI Interface,
the directory path will be C:\Temp\HiPath1100_AdmCAPI_ Drivers_040. Select a folder
and click "Next";
6-29
driver is selected, the directory
A31003-K1160-S100-03-7620
path will be
Service Manual