7
Configuring the system specifically for the client
Procedure Summary
Step
System Telephone/Standard MF Telephone
1.
System programming can only be executed using the
system's first extension slot (analog extension (MF) or
system telephone).
2.
Programming Mode: *95 + PASSWORD (default: 31994). Configure CommServer.
3.
Valid parameter or slot: beep (Brazil).
4.
When an incorrect setting is entered: 3 beeps (Brazil).
5.
When completed: 1 beep (Brazil).
6.
End programming: press "#" key or replace handset.
Table 7-1
Configuration procedure summary
7.1
Table of the System's Programming Codes
The Numbering Plan is configured based on the modules detected by the system.
For the HiPath 1120:
●
Motherboard
S
Module;
0
Analog Modules
For the HiPath 1150:
●
TME1 Module;
Motherboard
S0 Module
Analog Modules
For the HiPath 1190:
●
Analog Modules
TME1 Module;
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Table of the System's Programming Codes
HiPath 1100 Manager
Connect the PC to the
system.
Start the program.
System data are
automatically imported.
Start programming.
Export the new
configuration settings.
7-1