Siemens HiPath 1100 Service Manual page 286

Configuring the system specifically for the client
Comments about the System's Programming Codes
The settings that are automatically updated are: Month, Day, Time and Minute. Year
is not included in the FSK message settings - it is defined as the software's manu-
facturing date and can be manually adjusted.
Callback for external calls via ISDN (221)
By configuring this setting, an external ISDN call can request a Callback for the MSN number
called.
A callback can only be scheduled for a MSN.
MSN numbers must be programmed and must have attendants.
Call Charge Unit (195)
To show call charges in currency units you must specify a call charge factor. Pulses are
multiplied by this factor.
A Call Charge unit consists of a pulse sent over a line by a public exchange to provide and
display call charge information according to the type of call (local, long distance, International,
etc.) and other criteria determined by the carrier.
Multiple for Call Charge Factor (042)
This setting specifies the multiplier for Call Charge factors. The default setting specifies that
each pulse be multiplied by 1 for both factors.
Call Charge Factor for extensions (043)
This setting specifies whether the extension should be assigned a rate schedule and, if so,
which Factor should be used to calculate call charges.
Call Charge Value by Extension (197)
This setting specifies the amount that can be spent by each extension.
Call Cost Limit by Extension (044)
This setting limits the amount available to an extension for Call Charges.
Date for Updating the Call Cost Limit for an Extension (045)
This specifies a day for resetting the Call Charge limit.
7-48
A31003-K1160-S100-03-7620
Service Manual