Siemens HiPath 1100 Service Manual page 276

Configuring the system specifically for the client
Comments about the System's Programming Codes
Search Mode for Hunt Groups (022)
This setting specifies the type of search to be performed for an available extension within a
group, whether linear or round-robin.
When a call is received by a Hunt Group configured for Linear distribution, the search starts
from the first extension within the group. In a Round-robin distribution the search starts from
the extension following the last extension selected.
Override (144)
This setting allows a specific extension to "Override" two other extensions with a conversation
in progress.
Within the system, Override has the same limitation as the Silent Monitoring and Conference
features. A maximum of 2 simultaneous Silent Monitoring is allowed by the system. Important:
The Override feature is ticketed as a Conference.
Silent Monitoring (046)
This setting specifies the extension for performing Overrides without a beep.
Within the system, Silent Monitoring has the same limitation as the Conference and Override
features. A maximum of 2 simultaneous conferences is allowed by the system. Important: The
Override feature is ticketed as a Conference.
If the monitoring or the monitored party change status, Silent Monitoring will be canceled. This
occurs, for example, when a call is placed on hold.
On Profiset 3030 telephones the MUTE option is automatically activated with Silent
Monitoring.
Feature limited to specific countries.
Within the system, Silent Monitoring has the same limitation as the Conference and
Override features.
A maximum of 2 simultaneous conferences is allowed by the system. Important:
The Override feature is ticketed as a Conference. If the monitoring or the monitored
party change status, Silent Monitoring will be canceled. This occurs, for example,
when a call is placed on hold.
7-38
A31003-K1160-S100-03-7620
Service Manual