A.9.12 Txp_Mr_10E_L Card Specifications - Cisco ONS 15454 DWDM Reference Manual

Appendix A Hardware Specifications
•
•
•

A.9.12 TXP_MR_10E_L Card Specifications

The TXP_MR_10E_L card has the following specifications:
•
78-18343-02
Bit rate: 10GE (10.3125 Gbps), 10G FC (10.51875 Gbps), or STM-64/OC-192
–
Code: Scrambled NRZ
–
Fiber: 1310-nm single-mode
–
Maximum chromatic dispersion allowance: 6.6 ps/nm
–
Loopback modes: Terminal and facility
–
Connectors: LC
–
Transmitter (client side)
Maximum transmitter output power: –1 dBm
–
Minimum transmitter output power: –6 dBm
–
Center wavelength: 1290 to 1330 nm
–
Nominal wavelength: 1310 nm
–
– Transmitter: DFB laser
Receiver (client side)
– Maximum receiver level: –1 dBm at BER 1 * 10 exp – 12
Minimum receiver level: –14 dBm at BER 1 * 10 exp – 12
–
Receiver: APD
–
Link loss budget: 8 dB minimum, at BER = 1 * 10 exp – 12
–
Receiver input wavelength range: 1290 to 1605 nm
–
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
–
Line (trunk side)
– Bit rate: OC-192/STM-64 (9.95328 Gbps), OTU2 (10.70923 Gbps), 10GE (10.3125 Gbps),
10GE into OTU2 (non-standard 11.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
Code: Scrambled NRZ
–
Fiber: 1550-nm single-mode
–
– Maximum chromatic dispersion allowance: +/– 1200 ps/nm (specified penalty)
– Loopback modes: Terminal and facility
A.9.12 TXP_MR_10E_L Card Specifications
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-75