Cisco ONS 15454 DWDM Reference Manual page 679

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 18
SNMP
Table 18-8
Supported ONS 15454 SNMPv2 Trap Variable Bindings (continued)
Trap Name(s) Associated
Group
with
D1
(cont.)
D2
fallingAlarm (from RFC
2819)
78-18343-02
Variable
Binding
Number
SNMPv2 Variable Bindings
(5)
alarmRisingThreshold
(6)
cerent454NodeTime
(7)
cerent454AlarmState
(8)
snmpTrapAddress
(1)
alarmIndex
(2)
alarmVariable
(3)
alarmSampleType
(4)
alarmValue
(5)
alarmFallingThreshold
(6)
cerent454NodeTime
18.7.2 Variable Trap Bindings
Description
When the current sampled value
is greater than or equal to this
threshold, and the value at the last
sampling interval was less than
this threshold, a single event is
generated. A single event is also
generated if the first sample after
this entry is greater than or equal
to this threshold.
The time that an event occurred.
The alarm severity and
service-affecting status.
Severities are Minor, Major, and
Critical. Service-affecting
statuses are Service-Affecting
and Non-Service Affecting.
The address of the SNMP trap.
This variable uniquely identifies
each entry in the alarm table.
When an alarm in the table clears,
the alarm indexes change for each
alarm listed.
The object identifier of the
variable being sampled.
The method of sampling the
selected variable and calculating
the value to be compared against
the thresholds.
The value of the statistic during
the last sampling period.
When the current sampled value
is less than or equal to this
threshold, and the value at the last
sampling interval was greater
than this threshold, a single event
is generated. A single is also
generated if the first sample after
this entry is less than or equal to
this threshold.
The time that an event occurred.
Cisco ONS 15454 DWDM Reference Manual, R8.5
18-13

Advertisement

Table of Contents
loading

Table of Contents