A.7.11 Mmu Card Specifications - Cisco ONS 15454 DWDM Reference Manual

Appendix A Hardware Specifications

A.7.11 MMU Card Specifications

The MMU card optical specifications are listed in
For power specifications, see
Note
Table A-22
Parameter
Operating bandwidth
Insertion loss
Wavelength
dependent losses
Polarization
dependent loss (PDL)
Chromatic dispersion
Polarization mode
dispersion (PMD)
Optical power reading
resolution
Optical power reading
precision
78-18343-02
Width: 1.866 in. (47.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.00 in. (228.6 mm) for a standard DWDM unit
–
Table A-2 on page
MMU Optical Specifications
Note
All SOP, any
optical switch state,
and within whole
operating
temperature range,
connectors
included.
All SOP, any
optical switch state,
and within whole
operating
temperature range,
connectors
included.
All SOP, any
optical switch state,
and within whole
operating
temperature range,
connectors
included.
—
—
—
—
—
—
Table A-22.
A-6.
Condition Min
All paths 1500
EXP RX => —
COM TX
EXP A RX => —
COM TX
COM RX => —
EXP TX
COM RX => —
EXP A TX
C-band only —
L-band only —
C and L bands —
C-band only —
L-band only —
C and L bands —
All paths –20
All paths —
All photodiodes —
(both real and
virtual)
–0.1
Cisco ONS 15454 DWDM Reference Manual, R8.5
A.7.11 MMU Card Specifications
Typical Max Units
— 1605 nm
— 7.0 dB
— 2.3 dB
— 0.8 dB
— 14.8 dB
— 0.3 dB
— 0.3 dB
— 0.5 dB
— 0.2 dB
— 0.2 dB
— 0.3 dB
— +20 ps/nm
— 0.1 ps
— 0.1 dB
— 0.1 dB
A-37