Multishelf View Card Shortcuts - Cisco ONS 15454 DWDM Reference Manual

Chapter 12 Cisco Transport Controller Operation
Figure 12-6

12.5.2.2 Multishelf View Card Shortcuts

If you move your mouse over cards in the multishelf view graphic, popups display additional information
about the card including the card type; the card status (active or standby); the type of alarm, such as
Critical, Major, or Minor (if any); the alarm profile used by the card; and for transponder (TXP) or
muxponder (MXP) cards, the wavelength of the dense wavelength division multiplexing (DWDM) port.
12.5.2.3 Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Card Shortcuts
If you move your mouse over cards in the node view (single-shelf mode) or shelf view (multishelf mode)
graphic, popups display additional information about the card including the card type; the card status
(active or standby); the type of alarm, such as Critical, Major, or Minor (if any); the alarm profile used
by the card; and for TXP or MXP cards, the wavelength of the DWDM port. Right-click a card to reveal
a shortcut menu, which you can use to open, reset, delete, or change a card. Right-click a slot to
preprovision a card (that is, provision a slot before installing the card).
12.5.2.4 Multishelf View Tabs
Table 12-8
the multishelf node and its subtending shelves.
Table 12-8
Tab
Alarms
Conditions
History
Circuits
Provisioning
78-18343-02
12.5.2 Node View (Multishelf Mode), Node View (Single-Shelf Mode), and Shelf View (Multishelf Mode)
Facility Loopback Indicator
lists the tabs and subtabs available in the multishelf view. The actions on these tabs apply to
Multishelf View Tabs and Subtabs
Description
Lists current alarms (CR, MJ, MN) for the
multishelf node and updates them in real time.
Displays a list of standing conditions on the
multishelf node.
Provides a history of multishelf node alarms
including the date, type, and severity of each
alarm. The Session subtab displays alarms and
events for the current session. The Node subtab
displays alarms and events retrieved from a
fixed-size log on the node.
Creates, deletes, edits, and maps circuits.
Provisions the ONS 15454 multishelf node.
Subtabs
—
—
Session, Node
Circuits, Rolls
General, Network, OSI, Security,
SNMP, Comm Channels, Alarm
Profiles, Defaults, WDM-ANS
Cisco ONS 15454 DWDM Reference Manual, R8.5
12-13