Cisco ONS 15454 DWDM Reference Manual page 17

Optical Channel Circuits and Virtual Patchcords Reference
11
C H A P T E R
Cisco Transport Controller Operation
12
C H A P T E R
78-18343-02
10.7.1 Automatic Laser Shutdown
10.7.2 Automatic Power Reduction
10.7.3 Fiber Cut Scenarios
10.7.3.1 Scenario 1: Fiber Cut in Nodes Using OPT-BST/OPT-BST-E Cards
10.7.3.2 Scenario 2: Fiber Cut in Nodes Using OSC-CSM Cards
10.7.3.3 Scenario 3: Fiber Cut in Nodes Using OPT-BST-L Cards
10.7.3.4 Scenario 4: Fiber Cut in Nodes Using OPT-AMP-L, OPT-AMP-C, or OPT-AMP-17-C
(OPT-LINE Mode) Cards
10.7.3.5 Scenario 5: Fiber Cut in Nodes Using DCN Extension
10.8 Network-Level Gain-Tilt Management of Optical Amplifiers
10.8.1 Gain Tilt Control at the Card Level
10.8.2 System Level Gain Tilt Control
10.8.2.1 System Gain Tilt Compensation Without ROADM Nodes
10.8.2.2 System Gain Tilt Compensation With ROADM Nodes
10.9 Optical Data Rate Derivations
10.9.1 OC-192/STM-64 Data Rate (9.95328 Gbps)
10.9.2 10GE Data Rate (10.3125 Gbps)
10.9.3 10G FC Data Rate (10.51875 Gbps)
10.9.4 ITU-T G.709 Optical Data Rates
10.9.4.1 OC-192 Packaged Into OTU2 G.709 Frame Data Rate (10.70923 Gbps)
10.9.4.2 10GE Packaged Into OTU2 G.709 Frame Data Rate (Nonstandard 11.0957 Gbps)
10.9.4.3 10G FC Packaged Into OTU2 G.709 Frame Data Rate (Nonstandard 11.31764
Gbps)
10-36
10.10 Even Band Management
11.1 Optical Channel Circuits
11.1.1 OCHNC Circuits
11.1.2 OCHCC Circuits
11.1.3 OCH Trail Circuits
11.1.4 Administrative and Service States
11.1.5 Creating and Deleting OCHCCs
11.1.6 OCHCCs and Service and Communications Channels
11.2 Virtual Patchcords
11-6
12.1 CTC Software Delivery Methods
12.1.1 CTC Software Installed on the TCC2/TCC2P Card
12.1.2 CTC Software Installed on the PC or UNIX Workstation
10-19
10-19
10-20
10-25
10-29
10-31
10-34
10-34
10-34
10-34
10-35
10-36
11-1
11-2
11-2
11-3
11-4
11-6
12-1
12-1
Cisco ONS 15454 DWDM Reference Manual, R8.5
10-20
10-22
10-24
10-27
10-28
10-31
10-33
10-36
11-1
11-6
12-1
12-3
Contents
10-36
xvii