Appendix A
Hardware Specifications
•
A.5.2 OPT-BST Amplifier Card Specifications
The OPT-BST amplifier card has the following specifications:
•
•
A.5.3 OPT-BST-E Amplifier Card Specifications
The OPT-BST-E amplifier card has the following specifications:
•
78-18343-02
Dimensions
Height: 12.65 in. (332 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.00 in. (240 mm)
–
Optical characteristics:
Total operating wavelength range: 1530 to 1561.3 nm
–
Gain ripple (peak to valley): 1.5 dB
–
Gain range: 5 to 20 dBm with programmable gain tilt
–
Gain and power regulation over/undershoot: 0.5 dB
–
Limited maximum output power: 17.5 dBm
–
Maximum output power (with full channel load): 17 dB
–
–
Minimum output power (with one channel): –1 dBm
–
Input power (Pin) range at full channel load: –3 to 12 dBm
–
Input power (Pin) range at single channel load: –21 to –6 dBm
3
Noise figure at G
20 dB = 6 dB
–
OSC filter drop (channels) insertion loss maximum: 1 dB
–
OSC filter drop (OSC) insertion loss maximum: 1.8 dB
–
OSC filter add (OSC) insertion loss maximum: 1.3 dB
–
Optical connectors: LC-UPC/2
–
Dimensions
Height: 12.65 in. (332 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.00 in. (240 mm)
–
Optical characteristics:
–
Total operating wavelength range: 1530 to 1561.3 nm
–
Gain ripple (peak to valley): 1.8 dB
Gain range: 8 to 23 dB with programmable gain tilt
–
Extended gain range: 23 to 26 dB with gain tilt uncontrolled
–
Gain and power regulation over/undershoot: 0.5 dB
–
Limited maximum output power: 20.5 dBm
–
A.5.2 OPT-BST Amplifier Card Specifications
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-15