A.9 Transponder and Muxponder Card Specifications
Table A-31
Tx (Dropped) Band
B46.1
B50.1
B54.1
B58.1
The AD-4B-xx.x card optical input and output power varies with amplifier output levels and the class of
transponder interfaces used. See
information.
The AD-4B-xx.x has the following additional specifications:
•
A.9 Transponder and Muxponder Card Specifications
This section provides specifications for the TXP_MR_10G, MXP_2.5G_10G, TXP_MR_2.5G,
TXPP_MR_2.5G, MXP_MR_2.5G, MXPP_MR_2.5G, MXP_2.5G_10E, MXP_2.5G_10E_C,
MXP_2.5G_10E, TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, MXP_MR_10DME_C,
MXP_MR_10DME_L cards, and ADM-10G cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.
A.9.1 TXP_MR_10G Card Specifications
The TXP_MR_10G card has the following specifications:
•
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-48
AD-4B-xx.x Transmit and Receive Dropped Band Wavelength Ranges (continued)
Rx (Express) Band
Left Side (nm)
Wavelengths 1545.245 or lower
Wavelengths 1549.235 or lower
Wavelengths 1553.255 or lower
Wavelengths 1557.285 or lower
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.0 in. (228.6 mm)
–
Line (trunk side)
Bit rate:
–
9.95328 Gbps for OC-192/STM-64
10.70923 Gbps with ITU-T G.709 Digital Wrapper/forward error correction (FEC)
10.3125 Gbps for 10 Gigabit Ethernet (GE)
11.095 Gbps with ITU-T G.709 Digital Wrapper/FEC over 10 GE
–
Code: Scrambled NRZ
–
Fiber: 1550-nm single-mode
–
Maximum chromatic dispersion allowance: 1000 ps/nm
Loopback modes: Terminal and facility
–
Table 6-3 on page 6-3
through
Appendix A
Hardware Specifications
Right Side (nm)
Wavelengths 1549.695 or higher
Wavelengths 1553.705 or higher
Wavelengths 1557.745 or higher
—
Table 6-6 on page 6-5
for this
78-18343-02