Figure 2-8 Mic-C/T/P Faceplate - Cisco ONS 15454 DWDM Reference Manual

2.6.2 MIC-C/T/P FMEC
Connection for one of the two possible redundant power supply inputs
•
Connection for two serial ports for local craft/modem (for future use)
•
Connection for one LAN port
•
Connection for two system timing inputs
•
Connection for two system timing outputs
•
Storage of manufacturing and inventory data
•
For proper system operation, both the MIC-A/P and MIC-C/T/P FMECs must be installed in the shelf.
Figure 2-8
Figure 2-8
MIC-C/T/P
TIMING A
IN TIMING B OUT
AUX
TERM
LAN
CAUTION
TIGHTEN THE FACEPLATE TIGHTEN THE FACEPLATE
SCREWS WITH 1.0 NM TORQUE SCREWS WITH 1.0 NM TORQUE
BATTERY A
271306
Figure 2-9
Cisco ONS 15454 DWDM Reference Manual, R8.5
2-22
shows the MIC-C/T/P FMEC faceplate.
MIC-C/T/P Faceplate
LINK
ACT
GND
shows a block diagram of the MIC-C/T/P.
Chapter 2 Common Control Cards
78-18343-02