A.3.5 Mic-A/P Fmec Specifications (Etsi Only) - Cisco ONS 15454 DWDM Reference Manual

Appendix A Hardware Specifications
•
•

A.3.5 MIC-A/P FMEC Specifications (ETSI only)

The MIC-A/P FMEC card has the following specifications:
•
•
•
•
A.3.6 MIC-C/T/P FMEC Specifications (ETSI only)
The MIC-C/T/P FMEC card has the following specifications:
•
•
78-18343-02
Environmental
Overvoltage protection: as in ITU-T G.703 Annex B
–
Dimensions of AEP board
Height: 20 mm (0.79 in.)
–
Width: 330 mm (13.0 in.)
–
Depth: 89 mm (3.5 in.)
–
Weight: 0.18 kg (0.4 lb)
–
Power supply input BATTERY B
System supply voltage: Nominal –48 VDC
–
Tolerance limits: –40.5 to –57.0 VDC
Connector: 3WK3 Combo-D power cable connector
–
Alarm outputs
Voltage (open contact): Maximum 60 VDC
–
Current (closed contact): Maximum 250 mA
–
– Connector: 62-pin DB connector (common for inputs/outputs)
Alarm inputs
– Voltage (open contact): Maximum 60 VDC
Current (closed contact): Maximum 2 mA
–
Connector: 62-pin DB connector (common for inputs/outputs)
–
Dimensions
Height: 182 mm (7.165 in.)
–
Width: 31.88 mm (1.255 in.)
–
Depth: 92 mm (3.62 in.)
–
Depth with backplane connector: 98 mm (3.87 in.)
–
Weight not including clam shell: 0.2 kg (0.5 lb)
–
Power supply input BATTERY A
– System supply voltage: Nominal –48 VDC
Tolerance limits: –40.5 to –57.0 VDC
Connector: 3WK3 Combo-D power cable connector
–
Timing connector
– Frequency: 2.048 MHz +/–10 ppm
A.3.5 MIC-A/P FMEC Specifications (ETSI only)
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-11