Chapter 1
Shelf Assembly Hardware
Figure 1-49
entry/exit
1.12.5 Fiber Management Using the Optional ANSI Tie-Down Bar
You can install a 5-inch (127-mm) tie-down bar on the rear of the ANSI chassis. You can use tie-wraps
or other site-specific material to bundle the cabling and attach it to the bar so that you can more easily
route the cable away from the rack.
Figure 1-50
Figure 1-50
78-18343-02
Fiber-Storage Tray
West
shows the tie-down bar, the ONS 15454 ANSI, and the rack.
Tie-Down Bar on the Cisco ONS 15454 ANSI Shelf Assembly
1.12.5 Fiber Management Using the Optional ANSI Tie-Down Bar
Tie-down bar
Cisco ONS 15454 DWDM Reference Manual, R8.5
East
entry/exit
1-49