A.9.8 Mxp_Mr_10Dme_C Card Specifications - Cisco ONS 15454 DWDM Reference Manual

Appendix A Hardware Specifications
Table A-38
OSNR
13 dB
1. OSNR defined with 0.1 nm RBW
2. Receiver filter bandwidth greater than or equal to 180 pm (at – 3 dBm)
•
•
•
•

A.9.8 MXP_MR_10DME_C Card Specifications

The MXP_MR_10DME_C card has the following specifications:
•
78-18343-02
MXP_2.5G_10E_L Card Receiver Trunk Side Specifications (continued)
1
FEC Type Pre-FEC BER
Enhanced < 7 x 10 exp – 4 < 10 exp – 15
Receiver: APD
–
Link loss budget: 24 dB minimum, with no dispersion or 22 dB optical path loss at
–
BER = 1 * 10 exp – 12 including dispersion
Receiver input wavelength range: 1570 to 1604 nm
–
Line (client side)
Bit rate: 2.5 Gbps per port (OC-48/STM-16)
–
Code: Scrambled NRZ
–
– Fiber: 1310-nm single-mode
– Maximum chromatic dispersion allowance: 12 ps/nm (SR SFP version)
– Loopback modes: Terminal and facility
Connectors: LC (optical)
–
Transmitter (client side): Depends on the SFP that is used.
Receiver (client side): Depends on the SFP that is used.
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
–
Payload configuration
FC1G—Fibre Channel 1.06 Gbps
–
– FC2G—Fibre Channel 2.125 Gbps
– FC4G—Fibre Channel 4.25 Gbps
– FICON1G—Fiber connectivity 1.06 Gbps (IBM signal)
FICON2G—Fiber connectivity 2.125 Gbps (IBM signal)
–
FICON4G—Fiber connectivity 4.25 Gbps (IBM signal)
–
ISC compatability
–
ISC peer 1G
–
A.9.8 MXP_MR_10DME_C Card Specifications
Input Power
Post-FEC BER Sensitivity
– 8 to – 18 dBm
Cisco ONS 15454 DWDM Reference Manual, R8.5
Chromatic Dispersion
2
Tolerance
—
A-65