Inserting The Client Adapter Into A Computing Device; Inserting A Pc Card - Cisco AIR-PCM342 Hardware Installation Manual

Inserting the Client Adapter into a Computing Device

Inserting the Client Adapter into a Computing Device
Note
Caution

Inserting a PC Card

Step 1
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-2
If you are running Windows 95, 98, NT, or 2000 and a Cisco Aironet
client adapter was previously installed on your computer with the
6.10 driver, you must remove this driver before you can insert your
new client adapter and install its more recent driver. Refer to the
"Removing the 6.10 Driver" section on page 4-10 for instructions.
This section provides instructions for inserting a PC card or a PCI client adapter
into a computing device.
These procedures and the physical connections they describe apply
generally to conventional PC card slots and PCI expansion slots. In
cases of custom or nonconventional equipment, be alert to possible
differences in PC card slot and PCI expansion slot configurations.
Before you begin, examine the PC card. One end has a dual-row, 68-pin PC card
connector. The card is keyed so it can be inserted only one way into the PC card
slot.
Note The PC card slot is on the left or right side of the computer,
depending on the model.
Chapter 3 Installing the Client Adapter
OL-0795-01