A.3.7 Ms-Isc-100T Card Specifications - Cisco ONS 15454 DWDM Reference Manual

A.3.7 MS-ISC-100T Card Specifications

•
•
•
A.3.7 MS-ISC-100T Card Specifications
The MS-ISC-100T card has the following specifications:
•
A.4 Optical Service Channel Cards
This section provides specifications for the OSCM and OSC-CSM cards.
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-12
Signal level: 0.75 to 1.5 V
–
Impedance: 75 ohms +/–5 percent (switchable by jumper to high impedance > 3 kohms)
–
120 ohms balanced impedance is possible with external matching cable.
Note
Cable attenuation: Up to 6 dB at 2 MHz
–
Connectors: 1.0/2.3 miniature coax connector
–
System management serial port:
System management serial port craft interface
–
Modem port (for future use)
–
Connectors: 8-pin RJ-45
–
System management LAN port connectors:
Signal: IEEE 802.3 10BaseT
–
– Connectors: 8-pin RJ-45
Dimensions
– Height: 182 mm (7.165 in.)
Width: 31.88 mm (1.255 in.)
–
Depth: 92 mm (3.62 in.)
–
Depth with backplane connector: 98 mm (3.87 in.)
–
Weight not including clam shell: 0.2 kg (0.5 lb)
–
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
– Weight not including clam shell: 2.3 lb (1.0 kg)
Appendix A Hardware Specifications
78-18343-02