Cisco ONS 15454 DWDM Reference Manual page 463

Chapter 9 Node Reference
The meanings of the icons in the upper right corner are as follows:
•
•
The Patchcord icon is not functional for Software Release 8.5.
Note
•
•
The bottom pane can be used to display alarms (using the Alarms tab) or Circuits (using the Circuits tab).
Clicking the Alarms tab displays the same information as the Alarms tab in the network, node, or card
view. Clicking the Circuits tab displays the same information as the Alarms tab in the network, node, or
card view.
9.7.2 Using the Graphical Display
This section explains how to use the graphical portion of the display to gather information about the
cards and ports.
9.7.2.1 Displaying a Side
Double-click a side to show the details of that side. For example, if you double-click Side A in
Figure
Figure 9-42
78-18343-02
Select—use this icon to select a graphical element in the graphical view pane.
Patchcord—Use this icon to create an internal patchcord between cards.
Zoom In/Zoom Out—Use these icons to zoom in or zoom out in the graphical display pane.
Fit to View—Use this icon to have the graphical view fit the space available on your screen.
9-41, the result is as shown in
Side A Details
9
1
Figure 9-42.
6
8
7
2 3
5
Cisco ONS 15454 DWDM Reference Manual, R8.5
9.7.2 Using the Graphical Display
4
9-63