Payload Pm Statistics Window - Cisco ONS 15454 DWDM Reference Manual

Chapter 17 Performance Monitoring
Table 17-3
SONET
SDH
1. Applicable to optical channel (OCH) and Client (CLNT) facilities.
2. For MXP_MR_2.5G and MXPP_MR_2.5G cards, these parameters are shown in the Performance > Payload PM > SONET

17.2.2.2 Payload PM Statistics Window

Table 17-4
TXP_MR_10G, TXP_MR_10E, TXP_MR_10E_C, and TXP_MR_10E_L cards. PPM provisioning
must be completed under the card view Provisioning > Pluggable Port Modules tab for 10 GE to be
enabled. For PPM provisioning procedures, refer to the Cisco ONS 15454 DWDM Procedure Guide. The
parameters are listed under card view on the Performance > Payload PM > Statistics tab. For 10 GE
payload definitions, see
Utilization PMs are also available per port.
Note
78-18343-02
ONS 15454 SONET/SDH Layer Far-End and Near-End PMs
Layer Far-End (FE)
CV-LFE
ES-LFE
FC-LFE
SES-LFE
UAS-LFE
MS-BBE
MS-BBER
MS-EB
MS-ES
MS-ESR
MS-SES
MS-SESR
MS-UAS
PM tabs in the card view.
lists the 10 Gigabit Ethernet (10 GE) payload statistics that are available on the
Table 17-27 on page
1, 2
Layer Near-End
CV-L
CV-S
ES-L
ES-S
FC-L
SES-L
SES-S
SEF-S
UAS-L
RS-BBE
RS-BBER
RS-EB
RS-ES
RS-ESR
RS-SES
RS-SESR
RS-UAS
MS-BBE
MS-BBER
MS-EB
MS-ES
MS-ESR
MS-SES
MS-SESR
MS-UAS
17-23.
Cisco ONS 15454 DWDM Reference Manual, R8.5
17.2.2 Payload PM Window
1, 2
Note
Applicable standard is
Telcordia GR-253.
Applicable standard is
Telcordia GR-253.
17-7