Wss Port-Level Indicators - Cisco ONS 15454 DWDM Reference Manual

7.3.7 32WSS Port-Level Indicators

Table 7-10
Card-Level Indicators
Red FAIL LED
Green ACT LED
Amber SF LED
7.3.7 32WSS Port-Level Indicators
You can find the alarm status of the 32WSS card's ports using the LCD screen on the ONS 15454
fan-tray assembly. The screen displays the number and severity of alarms on a given port or slot. For the
procedure to view these counts, refer to "Manage Alarms" in the Cisco ONS 15454 DWDM Procedure
Guide.
7.4 32WSS-L Card
Note See the
For 32WSS-L safety label information, see the
Note
section on page
The two-slot 32-Channel Wavelength Selective Switch L-Band (32WSS-L) card performs channel
add/drop processing within the ONS 15454 DWDM node. The 32WSS-L card is particularly well suited
for use in networks that employ DS fiber or SMF-28 single-mode fiber.The 32WSS-L card can be
installed in the following pairs of slots:
•
•
•
•
•
•
Cisco ONS 15454 DWDM Reference Manual, R8.5
7-18
32WSS Card-Level Indicators
Description
The red FAIL LED indicates that the card's processor is not ready or that
there is an internal hardware failure. Replace the card if the red FAIL LED
persists.
The green ACT LED indicates that the 32WSS card is carrying traffic or is
traffic-ready.
The amber SF LED indicates a signal failure on one or more of the card's
ports. The amber SF LED also illuminates when the transmit and receive
fibers are incorrectly connected. When the fibers are properly connected, the
light turns off.
"A.7.4 32WSS-L Card Specifications" section on page A-27
7-9.
Slots 1 and 2
Slots 3 and 4
Slots 5 and 6
Slots 12 and 13
Slots 14 and 15
Slots16 and 17
Chapter 7 Reconfigurable Optical Add/Drop Cards
for hardware specifications.
"7.2 Safety Labels for Class 1M Laser Product Cards"
78-18343-02