Figure 8-21 Mxp_Mr_2.5G And Mxpp_Mr_2.5G Faceplates; Block Diagram - Cisco ONS 15454 DWDM Reference Manual

8.9.7 Block Diagram

Figure 8-21
MXP_MR_2.5G
For information on safety labels for the cards, see the
page
8.9.7 Block Diagram
Figure 8-22
Ports 1 and 2 can be used for GE, FC, FICON, or ESCON. Ports 3 through 8 are used for ESCON client
interfaces. There are two SERDES blocks dedicated to the high-speed interfaces (GE, FC, FICON, and
ESCON) and two SERDES blocks for the ESCON interfaces. A FPGA is provided to support different
configurations for different modes of operation. This FPGA has a Universal Test and Operations
Cisco ONS 15454 DWDM Reference Manual, R8.5
8-48
MXP_MR_2.5G and MXPP_MR_2.5G Faceplates
MXP
MR
2.5G
15xx.xx
15xx.xx
FAIL
ACT/STBY
SF
8-6.
shows a block diagram of the MXP_MR_2.5G card. The card has eight SFP client interfaces.
Chapter 8
MXPP
MR
2.5G
15xx.xx
15xx.xx
FAIL
ACT/STBY
SF
MXPP_MR_2.5G
"8.2.2 Class 1M Laser Product Cards" section on
Transponder and Muxponder Cards
78-18343-02