Node View (Single-Shelf Mode) Or Shelf View (Multishelf Mode) Tabs - Cisco ONS 15454 DWDM Reference Manual

Chapter 12 Cisco Transport Controller Operation
Table 12-9
Tab
Inventory
Maintenance
12.5.3 Network View
Network view allows you to view and manage ONS 15454s that have DCC connections to the node that
you logged into and any login node groups you have selected
78-18343-02
Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs and Subtabs
Description
Provides inventory information (part number,
serial number, and CLEI codes) for cards
installed in the single-shelf or multishelf node.
Allows you to delete and reset cards and change
the card service state.
Each card has bootstrap and boot code.
Note
After the card is upgraded using the boot
code upgrade procedure, the bootstrap
version is displayed in the Inventory tab
in CTC; However, the boot code version
is not displayed in the Inventory tab.
Performs maintenance tasks for the single-shelf
or multishelf node.
Subtabs
—
Single-shelf mode: Database,
Network, OSI, Software,
Diagnostic, Audit, DWDM
Multishelf mode: Protection,
Overhead XConnect, Diagnostic,
Timing
(Figure 12-7).
Cisco ONS 15454 DWDM Reference Manual, R8.5
12.5.3 Network View
12-15