A.9.11 Txp_Mr_10E_C Card Specifications - Cisco ONS 15454 DWDM Reference Manual

A.9.11 TXP_MR_10E_C Card Specifications

•
•
•
A.9.11 TXP_MR_10E_C Card Specifications
The TXP_MR_10E_C card has the following specifications:
•
Caution
•
Cisco ONS 15454 DWDM Reference Manual, R8.5
A-72
Transmitter (client side)
Maximum transmitter output power: –1 dBm
–
Minimum transmitter output power: –6 dBm
–
Center wavelength: 1290 to 1330 nm
–
Nominal wavelength: 1310 nm
–
Transmitter: DFB laser
–
Receiver (client side)
Maximum receiver level: –1 dBm at BER 1 * 10 exp – 12
–
Minimum receiver level: –14 dBm at BER 1 * 10 exp – 12
–
Receiver: APD
–
Link loss budget: 8 dB minimum, at BER = 1 * 10 exp – 12
–
– Receiver input wavelength range: 1290 to 1605 nm
Dimensions
– Height: 12.650 in. (321.3 mm)
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
–
Line (trunk side)
Bit rate: OC-192/STM-64 (9.95328 Gbps), OTU2 (10.70923 Gbps), 10GE (10.3125 Gbps),
–
10GE into OTU2 (non-standard 11.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
Code: Scrambled NRZ
–
Fiber: 1550-nm single-mode
–
Maximum chromatic dispersion allowance: +/– 1200 ps/nm (specified penalty)
–
Loopback modes: Terminal and facility
–
You must use a 15-dB fiber attenuator (10 to 20 dB) when working with the TXP_MR_10E_C
card in a loopback on the trunk port. Do not use direct fiber loopbacks with the
TXP_MR_10E_C card. Using direct fiber loopbacks causes irreparable damage to the
TXP_MR_10E_C card.
Connectors: LC
–
Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957, and ITU-T G.709
–
Transmitter (trunk side)
– Maximum transmitter output power: +6 dBm
Appendix A Hardware Specifications
78-18343-02