Cisco ONS 15454 DWDM Reference Manual page 444

9.5.2 Hub Node Fiber-Optic Cabling
2 Side A OPT-BST LINE TX to Side B OPT-BST or
OSC-CSM LINE RX on adjacent node
3 Side A OPT-BST OSC TX to Side A OSCM RX
4
Side A OPT-BST OSC RX to Side A OSCM TX
9.5.2 Hub Node Fiber-Optic Cabling
The following rules generally apply to hub node cabling:
•
•
•
•
•
•
Figure 9-34
OSC-CSM cards are installed, they are usually installed in Slots 1 and 17.
Cisco ONS 15454 DWDM Reference Manual, R8.5
9-44
The Side A OPT-BST or OSC-CSM card common (COM) TX port is connected to the Side A
OPT-PRE COM RX port or the Side A 32DMX-O/40-DMX-C/40-DMX-CE COM RX port.
The Side A OPT-PRE COM TX port is connected to the Side A 32DMX-O/40-DMX-C/40-DMX-CE
COM RX port.
The Side A 32MUX-O/32WSS/32WSS-L COM TX port is connected to the Side A OPT-BST or
Side A OSC-CSM COM RX port.
The Side B 32MUX-O/32WSS/32WSS-L COM TX port is connected to the Side B OPT-BST or
Side B OSC-CSM COM RX port.
The Side B OPT-BST or Side B OSC-CSM COM TX port is connected to the Side B OPT-PRE COM
RX port or the Side B 32DMX-O/32DMX COM RX port.
The Side B OPT-PRE COM TX port is connected to the Side B 32DMX-O/32DMX COM RX port.
shows an example of a hub node with cabling. In the example, OSCM cards are installed. If
6 Side B OSCM RX to Side B OPT-BST OSC TX
7 Side B OPT-BST LINE TX to Side A OPT-BST
or OSC-CSM LINE RX on adjacent node
8
Side B OPT-BST LINE RX to Side A OPT-BST
or OSC-CSM LINE TX on adjacent node
Chapter 9 Node Reference
78-18343-02