Figure 8-28 Adm-10G Card Port Capacities; Client Interfaces - Cisco ONS 15454 DWDM Reference Manual

Chapter 8 Transponder and Muxponder Cards
Figure 8-28 ADM-10G Card Port Capacities
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
GE or OC12/OC3 or
OC12/OC3
OC12/OC3
OC12/OC3
OC12/OC3

8.12.5 Client Interfaces

The ADM-10G card uses LC optical port connectors and, as shown in
SFPs that can be utilized for OC-N/STM-N traffic. Eight of the SFPs can be used for Gigabit Ethernet.
The interfaces can support any mix of OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, or Gigabit
Ethernet of any reach, such as SX, LX, ZX, SR, IR, or LR. The interfaces support a capacity of:
•
•
•
•
The supported client SFPs are:
•
•
78-18343-02
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
STM4/STM1 Gray SFP
4 x OC-48/STM-16
16 x OC-12/STM-4
16 x OC-3/STM-1
8 x GE
Gray SFPs
– 1000Base-SX SFP 850 nm (ONS-SE-G2F-SX=)
– 1000Base-LX SFP 1310 nm (ONS-SE-G2F-LX=)
– OC48/STM16 IR1, OC12/STM4 SR1, OC3/STM1 SR1, GE-LX multirate SFP 1310 nm
(ONS-SE-Z1=)
– OC3/STM1 IR1, OC12/STM4 IR1 multirate SFP 1310 nm (ONS-SI-622-I1=)
– OC48/STM16 SR1 SFP 1310 nm (ONS-SI-2G-S1=)
– OC48/STM16 IR1 SFP 1310 nm (ONS-SI-2G-I1=)
Colored DWDM SFPs
1000Base-ZX SFP 1550 nm (ONS-SI-GE-ZX=)
–
OC3/STM1 LR2 SFP 1550 nm (ONS-SI-155-L2=)
–
OC48/STM16 LR2 SFP 1550 nm (ONS-SI-2G-L2=)
–
OC48/STM16 SFP (ONS-SC-2G-xx.x)
–
1 ILK1
Gray XFP
(17)
2
3
4 13
Gray SFP
5 14
Gray SFP
15
6
Gray SFP
16
Gray SFP
7 ILK2
Gray XFP
(18)
8
9
10
11 TRK1
DWDM XFP OTU2/OC192/STM64
(19)
12
Cisco ONS 15454 DWDM Reference Manual, R8.5
8.12.5 Client Interfaces
OC192/STM64
OC48/OC12/OC3 or STM16/STM4/STM1
or
OC48/OC12/OC3
STM16/STM4/STM1
OC48/OC12/OC3 or
STM16/STM4/STM1
or
OC48/OC12/OC3 STM16/STM4/STM1
OC192/STM64
Figure 8-28, supports up to 16
8-71