Table 12-8 Multishelf View Tabs And Subtabs; Table 12-9 Node View (Single-Shelf Mode) Or Shelf View (Multishelf Mode) Tabs And Subtabs - Cisco ONS 15454 DWDM Reference Manual

12.5.2 Node View (Multishelf Mode), Node View (Single-Shelf Mode), and Shelf View (Multishelf Mode)
Table 12-8
Tab
Inventory
Maintenance
12.5.2.5 Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs
Table 12-9
mode).
Table 12-9
Tab
Alarms
Conditions
History
Circuits
Provisioning
Cisco ONS 15454 DWDM Reference Manual, R8.5
12-14
Multishelf View Tabs and Subtabs (continued)
Description
Provides inventory information (part number,
serial number, and Common Language
Equipment Identification [CLEI] codes) for
cards installed on all shelves in the multishelf
node. Allows you to delete and reset cards and
change the card service state.
Performs maintenance tasks for the multishelf
node.
lists the tabs and subtabs available in node view (single-shelf mode) or shelf view (multishelf
Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs and Subtabs
Description
Lists current alarms (CR, MJ, MN) for the node
or shelf and updates them in real time.
Displays a list of standing conditions on the
node or shelf.
Provides a history of node or shelf alarms
including the date, type, and severity of each
alarm. The Session subtab displays alarms and
events for the current session. The Node subtab
displays alarms and events retrieved from a
fixed-size log on the node.
Creates, deletes, edits, and maps circuits.
Provisions the ONS 15454 single-shelf or
multishelf node.
Chapter 12 Cisco Transport Controller Operation
Subtabs
—
Database, Network, OSI, Software,
Diagnostic, Audit, DWDM
Subtabs
—
—
Session, Node
Circuits, Rolls
Single-shelf mode: General,
Network, OSI, Security, SNMP,
Comm Channels, Alarm Profiles,
Defaults, WDM-ANS
Multishelf mode: General,
Protection, Timing, Alarm Profiles
78-18343-02