Selecting Circuits - Cisco ONS 15454 DWDM Reference Manual

9.7.2 Using the Graphical Display
•
After you have selected Fit to View for a side, you can right-click in the side view to bring up a new
menu with the following selections (see
•
•
Figure 9-49
Figure 9-50

9.7.2.9 Selecting Circuits

When the Circuits tab is selected, the circuits for the functional view are shown. The patchcord lines in
the graphical display are normally black in color. A patchcord line becomes green only when you select
a circuit associated with the patchcord that carries the selected circuit.
Cisco ONS 15454 DWDM Reference Manual, R8.5
9-70
Vertical Flip—Flips the side vertically (all connections are maintained).
Go to Upper View—Returns to the previous view.
Perform AutoLayout—Optimizes the placement of the cards and the connections between them.
Side A View Options
Side A View Options (after Selecting Fit to View)
Figure 9-50):
Chapter 9 Node Reference
78-18343-02