1.7 ONS 15454 ANSI Backplane Covers
Figure 1-26
1.7 ONS 15454 ANSI Backplane Covers
If a backplane does not have an electrical interface assembly (EIA) panel installed, it should have two
sheet metal backplane covers (one on each side of the backplane). See
in place with nine 6-32 x 3/8 inch Phillips screws.
Cisco ONS 15454 DWDM Reference Manual, R8.5
1-28
Laser Warning on the ONS 15454 ETSI Front-Door Label
Chapter 1
Shelf Assembly Hardware
Figure
1-27. Each cover is held
78-18343-02