9.3.1 Optical Side Stages
Figure 9-21
Fiber
Stage
Side A
According to
into three stages.
•
•
•
9.3.1.1 Fiber Stage
The fiber stage includes DWDM cards that are used to amplify transmitted or received signal and cards
that are used to add optical supervision channel. The fiber stage cards are:
•
•
Cisco ONS 15454 DWDM Reference Manual, R8.5
9-22
Interconnecting Sides Conceptual View
A/D
Stage
TXP/MXP Stage
Figure
9-21, each MSTP node side includes DWDM units that can be conceptually divided
Fiber stage—The set of DWDM cards with ports that directly or indirectly face the span.
A/D stage—The add/drop stage.
TXP/MXP stage—The virtual grouping of all TXP or MXP cards with signals multiplexed or
demultiplexed to and from the physical fiber stage.
Booster amplifier cards that directly connect to the span, such as:
–
OPT-BST
–
OPT-BST-E
–
OPT-BST-L
OPT-AMP-C, when provisioned in OPT-LINE (booster amplifier) mode
–
OPT-AMP-L, when provisioned in OPT-LINE (booster amplifier) mode
–
OPT-AMP-17-C, when provisioned in OPT-LINE (booster amplifier) mode
–
Preamplifier cards, such as:
OPT-PRE
–
OPT-AMP-C, when provisioned in OPT-PRE (preamplifier) mode
–
Interconnecting
sides I/F
Chapter 9
Node Reference
Side E
78-18343-02