Selecting Nodes For A Cluster - Cisco MDS 9216 Configuration Manual
Mds 9000 series san volume controller
Hide thumbs
Also See for MDS 9216:
- Hardware installation manual (140 pages) ,
- Connection manual (13 pages) ,
- Specification (11 pages)
Table of Contents
Advertisement
Chapter 3
Creating and Managing Clusters
Figure 3-1
Selecting Nodes for a Cluster
To configure a 4-node sample configuration, follow these steps.
Change to SVC configuration mode.
Step 1
switch1# svc-config
Display the available nodes in the local switch (switch 1).
Step 2
switch1(svc)# show nodes local
-------------------------------------------------------------------------------
Node
-------------------------------------------------------------------------------
svc3/1
svc3/2
svc7/1
svc7/2
78-16119-01, Cisco MDS SAN-OS Release 1.3
Sample SVC Configuration Using Cisco MDS Switches
Host 1
Cisco MDS 9500 Switch
Node 1
CSM 3
CSM 7
Node 3
cluster
Host 2
Node 2
Node 4
config
cluster
node
status
No
unconfigured free
No
unconfigured free
No
unconfigured free
No
unconfigured free
Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
Selecting Nodes for a Cluster
ESS
node
sw
status
version
1.3(1)
1.3(1)
1.3(1)
1.3(1)
3-3
Advertisement
Table of Contents
