Creating And Saving A Master Snapshot - Sony MVS-8000 User Manual

5

Creating and Saving a Master Snapshot

To save a master snapshot in the Snapshot menu, after recalling the
Snapshot>Master Snapshot>Store menu, refer to the operations in "Creating
and Saving a Master Timeline With the Menu" (page 153).
Recalling the Store menu
Carry out the following procedure.
1
2
3
180
Snapshot Operations in the Menus
• Turn the knobs to make the setting.
Knob Parameter
1 Register
3 Num
• To select all registers, press [All].
In the <Recall Mode> group, select one of the following modes for save
and recall operations.
XPT: Only the key material selection data is saved or recalled.
Modifier: Only the key modifier settings are saved or recalled.
Transition: Only the independent key transition settings are saved or
recalled.
Do either of the following.
• In the menu control block, press the top menu selection button
[SNAPSHOT].
• In the numeric keypad control block, press the [SNAPSHOT] button
twice in rapid succession.
The Snapshot menu appears.
Press VF1 'Master Timeline' and HF1 'Store.'
The Master Snapshot>Store menu appears.
The status area shows the master snapshot register names, register lock
status, register number for each region, and so on.
If required, press the following buttons in the status area to change the
region display.
M/E, P/P: indicate assignment of M/E-1 ("M/E1"), M/E-2 ("M/E2"), M/
E-3 ("M/E3"), and P/P ("P/P").
Adjustment
Register number
Select number of registers
Setting values
1 to 4
1 to 4