Copying Cross-Point Assign Tables - Sony MVS-8000 User Manual

Sequential names for multiple signals
When you specify a number at the end of a signal name, all of the signals in the
range selected by knobs 1 and 2 are automatically assigned names ending with
sequential numbers.
Example: To assign sequential names to source signal 2 through source signal
1. In step 2 above, set knob 1 to "2," and set knob 2 to "3."
2. Set the name of source signal 2 to "CAM2."
The name "CAM3" is assigned automatically to source signal 3, and the
name "CAM4" is assigned automatically to source signal 4.
Setting the source name display color
1
2

Copying Cross-Point Assign Tables

The contents of a cross-point assign table can be copied to another cross-point
assign table, and vice versa.
Notes
The contents of a sub table cannot be copied to the main table.
1
2
88
Cross-Point Settings (Xpt Assign Menu)
4
In the Panel >Xpt Assign >Table Button Assign >Src Name/LCD Color
menu, turn the knobs to select the setting target.
Knob Parameter Adjustment
1 Source No Source signal selection
2 Num Number of source signals to be
selected
In the <LCD Color> group, select the color (Orange/Green/Yellow).
In the Panel >Xpt Assign menu, press [Table Copy].
The Table Copy menu appears.
The status area shows a list of copy sources and a list of copy destinations.
Using any of the following methods, select the number of the table to use
as the copy source and the number of the table you want to be the copy
destination.
• Press directly on the list of copy sources (left-side list) or the list of copy
destinations (right-side list) in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Setting values
1 to 128
1 to 128