5
Applying a DME Effect to a Key
Note
For one M/E bank, DME effects (including DME wipes) can be used in up to
two places on the dedicated interface and in only one place on the SDI interface
simultaneously.
When combining the SDI interface with the dedicated interface, you can apply
DME effects to a maximum of three keys.(Requires a setting in setup.)
For details, see "Interfacing With External Devices (Device Interface Menu)"
in Chapter 16 (Volume 2).
Assigning a DME to a key
1
2
354
Key Setting Operations Using Menus
• When wipe is selected
Knob
Parameter
Adjustment
1
Size
Pattern size
2
Soft
Edge softness
• When utility 1 bus is selected
Knob
Parameter
Adjustment
1
Clip
Reference level for creating mask
signal
2
Gain
Gain
To invert the black and white sense of the mask source, press the [Mask
Invert] button, turning it on.
In the M/E-1 >Key1 menu, select HF5 'Processed Key.'
The Processed Key menu appears.
In the <DME Select> group, select the DME channel (DME1 to DME4) to
be used.
The lit colors of [DME1] to [DME4] indicate the DME assignment.
Lit green: Shows the DME assigned to the currently selected key.
Lit amber: Shows the DME assigned to a key other than the currently
selected key.
Off: DME is not assigned.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
+109.59 to –7.31
–100.00 to +100.00