Table 117: Network Upgrade Configuration; Figure 244: Network Upgrade - Grandstream Networks UCM6202 User Manual

Examples of valid URLs:
firmware.grandstream.com/BETA
The upgrading configuration can be accessed via Web GUIMaintenanceUpgrade.
Upgrade Via
Firmware Server Path
Firmware File Prefix
Firmware File Suffix
HTTP/HTTPS User Name
HTTP/HTTPS Password
Please follow the steps below to upgrade the firmware remotely.
1. Enter the firmware server path under Web GUIMaintenanceUpgrade.
2. Click on "Save". Then reboot the device to start the upgrading process.
3. Please be patient during upgrading process. Once done, a reboot message will be displayed in the LCD.
4. Manually reboot the UCM6200 when it's appropriate to avoid immediate service interruption. After it
boots up, log in the Web GUI to check the firmware version.

Figure 244: Network Upgrade

Table 117: Network Upgrade Configuration

Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Define the server path for the firmware server.
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6200.
If configured, only the firmware with the matching encrypted postfix will be
downloaded and flashed into the UCM6200.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
UCM6200 Series User Manual
P a g e | 337