Http Server; Time Settings; Auto Time Updating; Table 16: Http Server Settings - Grandstream Networks UCM6202 User Manual

HTTP Server

The UCM6200 embedded web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages
allow the users to configure the PBX through a Web browser such as Microsoft IE, Mozilla Firefox and Google
Chrome. By default, the PBX can be accessed via HTTPS using Port 8089 (e.g., https://192.168.40.50:8089).
Users could also change the access protocol and port as preferred under Web GUISystem SettingsHTTP
Server.
Redirect From Port 80
Protocol Type
Port
TLS Private Key
TLS Cert
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.

Time settings

Auto time updating

The current system time on the UCM6200 can be found under Web GUISystem StatusDashboardPBX
Status.
To configure the UCM6200 to update time automatically, go to Web GUISystem SettingsTime
SettingsAuto Time Updating.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
The configurations under Web GUISettingsTime SettingsAuto Time Updating page require reboot to
take effect. Please consider configuring auto time updating related changes when setting up the UCM6200 for
the first time to avoid service interrupt after installation and deployment in production.
-------------------------------------------------------------------------------------------------------------------------------------------- ------

Table 16: HTTP Server Settings

Enable or disable redirect from port 80. On the PBX, the default access
protocol is HTTPS and the default port number is 8089. When this option
is enabled, the access using HTTP with Port 80 will be redirected to
HTTPS with Port 8089. The default setting is "Enable".
Select HTTP or HTTPS. The default setting is "HTTPS". This is also the
protocol used for zero config when the end point device downloads the
config file from the UCM6200.
Specify port number to access the HTTP server. The default port number
is 8089.
Upload private key for the built-in http server
Upload certificate for the built-in http server and override the existing one.
UCM6200 Series User Manual
P a g e | 72