Disa; Figure 167: Create New Disa - Grandstream Networks UCM6202 User Manual

In many situations, the user will find the need to access his own IP PBX resources but he is not physically near
one of his extensions. However, he does have access to his own cell phone. In this case, we can use what is
commonly known as DISA (Direct Inward System Access). Under this scenario, the user will be able to call from
the outside, whether it's using his cell phone, pay phone, regular PSTN, etc. After calling into UCM6200, the
user can then dial out via the SIP trunk or PSTN trunk connected to UCM6200 as it is an internal extension.
The UCM6200 supports DISA to be used in IVR or inbound route. Before using it, create new DISA under Web
GUICall FeaturesDISA.
•
Click on to add a new DISA.
•
Click on to edit the DISA configuration.
•
Click on to delete the DISA.
The following table details the parameters to set and configure DISA feature on UCM6200 PBX.

DISA

Figure 167: Create New DISA

UCM6200 Series User Manual
P a g e | 248