Table 35: Iax Extension Configuration ParametersBasic Settings - Grandstream Networks UCM6202 User Manual

Table 35: IAX Extension Configuration ParametersBasic Settings
General
Extension The extension number associated with the user.
Configure the CallerID Number that would be applied for outbound calls from this
user.
CallerID Number
Note: The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
Permission setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls using this rule.
Configure the password for the user. A random secure password will be automatically
SIP/IAX Password
generated. It is recommended to use this password for security purpose.
Enable Voicemail Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the voicemail box.
Voicemail
A random numeric password is automatically generated. It is recommended to use
Password
the random generated password for security purpose.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default, this option is disabled.
Verification
If selected, this extension will be disabled on the UCM6200.
Disable This
Note: The disabled extension still exists on the PBX but can't be used on the end
Extension
device.
User Settings
Configure the first name of the user. The first name can contain characters, letters,
First Name
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
Last Name
digits and _.
Email Address Fill in the Email address for the user. Voicemail will be sent to this Email address.
Configure the password for user portal access. A random numeric password is
User Password automatically generated. It is recommended to use the randomly generated password
for security purpose.
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUIPBX
SettingsVoice PromptLanguage Settings. The dropdown list shows all the
Language
current available voice prompt languages on the UCM6200. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUIPBX SettingsVoice PromptLanguage Settings.
UCM6200 Series User Manual
P a g e | 127