Grandstream Networks UCM6202 User Manual page 140

•
•
•
Configure Voicemail password (digits only) for the users.
•
Voicemail
Password
•
•
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under Web GUIPBX SettingsVoice
PromptCustom Prompt: General Preference. The valid range is between 5
Ring Timeout
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record disabled. The recording files can be accessed under Web GUICDRRecording
Files.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
Select which Music On Hold class to suggest to extensions when putting them on
Music On Hold
hold.
If enabled, the batch added extensions will be added to LDAP Phonebook PBX list;
Enable LDAP if disabled, the batch added extensions will be skipped when creating LDAP
Phonebook.
Call Duration Limit Configure the maximum duration of call-blocking.
IAX Settings
Max Number of Calls Configure the maximum number of calls allowed for each remote IP address.
Configure to enable/disable requiring call token. If set to "Auto", it might lock out
users who depend on backward compatibility when peer authentication credentials
Require Call Token
are shared between physical endpoints.
The default setting is "Yes".
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
UCM6200 Series User Manual
P a g e | 139