Call Park; Park A Call; Retrieve Parked Call; Figure 177: Download Recording File From Cdr Page - Grandstream Networks UCM6202 User Manual

The above recorded call's recording files are also listed under the UCM6200 Web GUICDRRecording Files.

Call Park

The UCM6200 provides call park and call pickup features via feature code.

Park a Call

There are two feature codes that can be used to park the call.
•
Feature MapsCall Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to 720)
will be announced after parking the call.
•
Feature MiscCall Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking lot
number (default range 701 to 720) will be announced after parking the call.

Retrieve Parked Call

To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked call is
not retrieved after the timeout, the original extension who parks the call will be called back.

Figure 177: Download Recording File from CDR Page

Figure 178: Download Recording File from Recording Files Page

UCM6200 Series User Manual
P a g e | 266