Table 58: Outbound Routes/Pin Group; Figure 110: Create New Pin Group - Grandstream Networks UCM6202 User Manual

Name
Record In CDR
PIN Number
PIN Name
Once user click on
The following screenshot shows an example of created PIN Groups and members:

Table 58: Outbound Routes/PIN Group

Specify the name of the group
Specify whether to enable/disable record in CDR
Specify the code that will asked once dialing via a trunk
Specify the name of the PIN
the following figure shows to configure the new PIN.

Figure 110: Create New PIN Group

UCM6200 Series User Manual
P a g e | 180