Change Password
After logging in the UCM6200 Web GUI for the first time, it is highly recommended for users to change the default
password "admin" to a more complicated password for security purpose. Follow the steps below to change the
Web GUI access password.
1. Go to Web GUIMaintenanceChange Information page.
2. Enter the old password first.
3. Enter the new password and re-type the new password to confirm. The new password has to be at least 4
characters. The maximum length of the password is 30 characters.
4. Configure the Email Address that is used when login credential is lost.
5. Click on "Save" and the user will be automatically logged out.
6. Once the web page comes back to the login page again, enter the username "admin" and the new password
to login.
Enter Old Password
Enter New Password
Retype New Password
Change binding Email
UCM6200 allows user to configure binding email in case login password is lost. UCM6200 login credential will
be sent to the designated email address. The feature can be found under Web GUISystem SettingsUser
ManagementChange Binding Email.
Figure 239 : Change Password
Enter the Old Password for UCM6200
Enter the New Password for UCM6200
Retype the New Password for UCM6200
UCM6200 Series User Manual
P a g e
|
332