Make Your First Call - Grandstream Networks UCM6202 User Manual

Make Your First Call

Power up the UCM6200 and your SIP end point phone. Connect both devices to the network. Then follow the
steps below to make your first call.
1. Log in the UCM6200 Web GUI, go to Extension/TrunkExtensions.
2. Click on to create a new extension. You will need User ID, Password and Voicemail Password
information to register and use the extension later.
3. Register the extension on your phone with the SIP User ID, SIP server and SIP Password information. The
SIP server address is the UCM6200 IP address.
4. When your phone is registered with the extension, dial *97 to access the voicemail box. Enter the Voicemail
Password once you hear "Password" voice prompt.
5. Once successfully logged in to the voicemail, you will be prompted with the Voice Mail Main menu.
6. You are successfully connected to the PBX system now.
UCM6200 Series User Manual
P a g e | 41