Email; Email Settings; Table 20: Email Settings - Grandstream Networks UCM6202 User Manual

Email

Email settings

The Email application on the UCM6200 can be used to send out alert event Emails, Fax (Fax-To-Email),
Voicemail (Voicemail-To-Email) etc. The configuration parameters can be accessed via Web GUISystem
SettingsEmail SettingsEmail Settings.
TLS Enable
Type
Domain
Server
Username
Password
Display Name
Sender
The following figure shows a sample Email setting on the UCM6200, assuming the Email is using 192.168.6.202
as the SMTP server.

Table 20: Email Settings

Enable or disable TLS during transferring/submitting your Email to
another SMTP server. The default setting is "Yes".
Select Email type.
•
MTA: Mail Transfer Agent. The Email will be sent from the
configured domain. When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
•
Client: Submit Emails to the SMTP server. A SMTP server is
required and users need login with correct credentials.
Specify the domain name to be used in the Email when using type
"MTA".
Specify the SMTP server when using type "Client".
Username is required when using type "Client". Normally it's the Email
address.
Password to login for the above Username (Email address) is required
when using type "Client".
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example:
pbx@example.mycompany.com.
UCM6200 Series User Manual
P a g e | 78